Electric Wrist Rotator
Quick Links
| Part # | Description |
|---|
Product information
The Electric Wrist Rotator provides electrical rotation that can be operated with all ottbock System Electric Hands that are equipped with the Quick Disconnect Wrist.
- Required for pronation and supination of the hand
- If muscular tension is not sufficient for operation with the 13E205 MyoRotonic, the 10S17 can be controlled by the 9X14 Harness Pull Switch, the 9X18 Traction Switch, or the 9X25 Rocker Switch
- Includes:
- 11S4 Lock Ring
- 11S61 Wrist Drive with Coaxial Plug
- 11S25 Lock Ring
- 9E85 Protective Cap
- 9E363 Drive Unit
- 9E365 Protection Plug
Specifications
- Weight (g): 96
- Operating Voltage: 6/7.2 V
- Approx. No-Load Current: 150 mA
- Approx. Stall Current: 1000 mA
- Rotation Range: 360 30 Degrees
- Idle Speed: 13.5 U/min
- Corresponds to Rotation Angle of: 81 28 degrees/sec
| HCPCS: | L7259 |
|---|
Frequently Bought Together
Lamination Ring
Lamination ring for System Electric Hands or System Electric Greifers with lamination protection cover for bonding.
MyoRotronic
The MyoRotronic is compatible with all ottobock Myobock System Electric Hands and System Electric Greifers with Quick-Disconnect Wrist and enables proportional or digital control of the 10S17 Electric Wrist Rotator.5 different programs can be selected using the 757T13 Myo Select and allow individual adaptation to the respective patient. One or two 13E200 Electrodes or 13E202 Suction Socket Electrodes or a combination of one electrode and a 9X50/9X52 Linear Control Element are used to control the 13E205 MyoRotronic.Includes:MyoRotronic13E183 Buzzer for acoustic feedback on the switchoverThe 757T13 MyoSelect is required to select programs and adjust the 13E205 MyoRotronic. When using the 10S17 Electric Wrist Rotator and the 13E205 MyoRotronic, the distance between the residual limb end and wrist must be at least 65 mm . The rotation can be switched off using the 9X24 Connection Cable.